Mowi P30 Forestry Crane
FTG MOWI P30
The Mowi P30 is intended for use with the Mowi 850, 1050 and 1050 WD trailers.
The P30 has a reach/lifting capacity of 5.7 m/490 kg at full reach.
A Mowi parallel crane performs two actions at once (retraction) and has a movement pattern that enables loads to be stacked high. A Mowi crane requires a lower oil flow compared to other cranes. This enables it to be operated at low engine speeds, which saves fuel and the environment and provides a more comfortable noise level in the cab. The crane has a lifting torque of 31 kNm.
As standard, it is equipped with a CR300 rotator, a FB190 grapple and a multi-lever valve.
More information about Mowi P30 Forestry Crane
Technical info
| Crane | P30 |
| Reach (m) | 5.7 |
| Telescope | No |
| Lifting torque gross (kNm) | 31 |
| Lifting capacity, max reach (kg) | 490 |
| Lifting capacity at 4 m (kg) | 705 |
| Rec. oil flow (l/min) | 25-30 |
| Working pressure (bar) | 170 |
| Slewing torque (kNm) | 8.5 |
| Slewing angle | 360° |
| Weight without grapple and rotator (kg) | 540 |
| Standard equipment | |
| Hydraulic valve | Multi-lever |
| Rotator | CR300/3 ton |
| Grapple | FB190 |
| Optional equipment | |
| Braked link | ✔ |
| Winch, crane mounted | ✔ |
| Winch, manual/radio controlled | ✔ |
| Work lights, crane arm | ✔ |
| Valve options | |
| 2-lever mechanical (HCD3M) | ✔ |
| 2-lever lightweight el on/off | ✔ |
| PCL low pressure servo | ✔ |
| EHC el. servo | ✔ |
| Radio control (Scanreco) | ✔ |
